psd03 thru psd36c standard capacitance tvs array 1 05118.r10 2/07 www.protekdevices.com applications ? laptop computers ? cellular phones ? digital cameras ? personal digital assistant (pda) iec compatibility (en61000-4) ? 61000-4-2 (esd): air - 15kv, contact - 8kv ? 61000-4-4 (eft): 40a - 5/50ns ? 61000-4-5 (surge): 24a, 8/20s - level 2(line-gnd) & level 3(line-line) features ? unidirectional: 500 watts peak pulse power per line (tp = 8/20s) ? bidirectionall 400 watts peak pulse power per line (tp = 8/20s) ? unidirectional & bidirectional configurations ? replacement for mlv (0805) ? protects one power or i/o port ? esd protection > 40 kilovolts ? low clamping voltage ? available in multiple voltage types ranging from 3v to 36v ? rohs compliant mechanical characteristics ? molded jedec sod-323 package ? weight 5 milligrams (approximate) ? available in lead-free pure-tin plating(annealed) ? solder reflow temperature: pure-tin - sn, 100: 260-270c ? consult factory for leaded device availability ? flammability rating ul 94v-0 ? 8mm tape and reel per eia standard 481 ? device marking: marking code & polarity band (unidirectional only) 05118 sod-323 pin configurations unidirectional bidirectional
psd03 thru psd36c 2 05118.r10 2/07 www.protekdevices.com device characteristics note 1: part numbers with an additional ?c? suffix are bidirectional devices, i.e., psd05 c. note 2: unidirectional only: positive potential is applied from pin 2 to 1 or pin 3 to 4. part number (see notes 1-2) device marking minimum breakdown voltage @ 1ma v (br) volts maximum clamping voltage (see fig. 2) @ i p = 1a v c volts maximum clamping voltage (see fig. 2) @8/20s v c @ i pp typical capacitance 0v @ 1 mhz c pf psd03 psd03c psd05 psd05c psd08 psd08c psd12 psd12c psd15 psd15c psd18 psd18c PSD24 PSD24c psd36 psd36c a g b h c j d k e l g n f m r t 4.0 4.0 6.0 6.0 8.5 8.5 13.3 13.3 16.7 16.7 20.0 20.0 26.7 26.7 40.0 40.0 6.5 7.0 9.8 9.8 13.4 13.4 19.0 19.0 24.0 24.0 29.0 29.0 43.0 43.0 60.0 60.0 10.9v @ 43.0a 10.9v @ 39.0a 13.5v @ 42.0a 14.5v @ 28.0a 16.9v @ 34.0a 18.5v @ 17.0a 25.9v @ 21.0a 29.5v @ 14.0a 30.0v @ 17.0a 33.0v @ 12.0a 40.0v @ 9.0a 40.0v @ 9.0a 49.0v @ 12.0a 46.2v @ 9.0a 75.0v @ 5.0a 75.0v @ 5.0a 500 200 350 175 250 150 150 50 100 40 90 40 88 40 75 35 maximum leakage current @v wm i d a 125 125 10 10 10 10 1 1 1 1 1 1 1 1 1 1 rated stand-off voltage v wm volts 3.3 3.3 5.0 5.0 8.0 8.0 12.0 12.0 15.0 15.0 18.0 18.0 24.0 24.0 36.0 36.0 electrical characteristics per line @ 25c unless otherwise specified operating temperature symbol v alue -55 to 150 c c -55 to 150 units t l t stg parameter storage temperature unidirectional peak pulse power (t p = 8/20s) - see figure 1 p pp 500 watts maximum ratings @ 25c unless otherwise specified bidirectional peak pulse power (t p = 8/20s) - see figure 1 p pp 400 watts
psd03 thru psd36c 3 05118.r10 2/07 www.protekdevices.com figure 5 typical reverse voltage vs capacitance for psd05 0 1 2 3 4 5 6 v r - reverse voltage - volts c - capacitance - pf 0 100 200 300 400 figure 4 overshoot & clamping voltage for psd03 esd test pulse: 25 kilovolt, 1/30ns (waveform) 5 volts per division -5 5 15 25 35 0 25 50 75 100 125 150 t l - lead temperature - c 20 40 60 80 100 % of rated power peak pulse power 8/20s average power figure 3 power derating curve 0 0 5 10 15 20 25 30 figure 2 pulse wave form figure 1 peak pulse power vs pulse time 0.01 1 10 100 1,000 10,000 t d - pulse duration - s t - time - s 0 20 40 60 80 100 120 i pp - peak pulse current - % of i pp test waveform parameters t f = 8s t d = 20s t f peak value i pp e -t t d = t i pp /2 10 100 1,000 10,000 p pp - peak pulse current - watts 500w, 8/20s waveform 400w, 8/20s waveform graphs
psd03 thru psd36c 4 05118.r10 2/07 www.protekdevices.com sod-323 package outline & dimensions copyright ? prot ek devices 2007 specifications: protek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except jedec). design changes: protek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer?s and that in furnishing engineering and technical assistance, protek assumes no responsibility with respect to the s election or specifications of such products. protek devices 2929 south fair lane, tempe, az 85282 tel: 602-431-8101 fax: 602-431-2288 e-mail: sales@protekdevices.com web site: www.protekdevices.com tape & reel ordering nomenclature 1. surface mount product is taped and reeled in accordance with eia-481. 2. suffix-t7 = 7 inch reel - 3,000 pieces per 8mm tape, i.e., psd05c-t7. 3. suffix - lf = lead-free, pure-tin plating, i.e., psd05c-lf-t7. a b c d e f h l 1.60 1.15 2.39 0.92 0.25 0.10 - 0.20 1.90 1.45 2.70 1.10 0.40 0.20 0.10 - 0.063 0.045 0.094 0.033 0.010 0.004 - 0.08 0.075 0.057 0.106 0.043 0.016 0.008 0.004 - dim min max min max millimeters inches package dimensions notes 1. controlling dimensions in millimeters. 2. dimensions are exclusive of mold flash and metal burrs. package outline sod-323 package mounting pad
!" # #$ $ %% &
' (" %)* % +%* * ,- %* note: cathode band for unidirectional parts only tape & reel specifications (dimensions in millimeters) de p0 tmax fp2 w 1.50 0.10 1.75 0.10 3.50 0.05 8.00 0.30 4.00 0.10 2.00 0.05 p 4.00 0.10 0.25 a0 b0 k0 reel dia. tape width 178mm (7?) 8mm 1.55 0.10 2.90 0.10 1.35 0.10 outline & dimensions: rev 2 - 9/05, 06010
|
